Guitar Update

Those of you who aren't guitar nerds...bear with me as this will be over in about 3 months (two of which will be devoted to curing). The painting process has begun (without the co-operation of the weather - The humidity has been too high so I moved the painting from the shed to the basement at the detriment of my little family. On the plus side I am enjoying the sweet apple smell of nitro lacquer. No one else is.)

Anyway. I had to disassemble the entire guitar and was worried about scratching the headstock trying to get the tuner bushings out. I remembered reading about an old trick. Heat 'em up and they'll pop right out:


I used an entire can of Sand&Sealer for the body (which was way too much according to those in the know - but that's what it took to get it right)


Used an entire can to primer it (which was way too much according to those in the know - but that's what it took to get it right) and put bondo in the places I missed:



Spraying metallics are different because they contain a "flop agent" that keeps the little aluminum flakes standing at random angles which result in all teh pretty sparklies. If the paint goes on too wet it overrides the flop control and it's not as sparkley. So being overly cautious I sprayed super light. This was my sixth coat:


After some good natured ribbing from the ReRanch message board ("Were you spraying from across the room?!?!?!) I moved closer and things started looking better. The next coat:




I also started on the neck. In pictures it doesn't look too bad but in real life it's really yellow. I used ReRanch's aged amber to simulate the look of a neck aged from the '50s but it didn't turn out how I envisioned. Who cares?

Taped up:



After gloss:

Also the colour wasn't quite what I had in mind. This was what I was hoping for:




This is what I ended up with. Notice how close it is to the factory finish Ocean Turquoise Metallic I have on my Jaguar:



After I moved on to some clear coats it did darken somewhat:


Next I will spray two more cans of clear then let it sit for 2 months. Then sand the crap out of it till it's like a mirror. (Notice all that "orange peel" I'll have to sand out)